Decal Application Guide


Thanks for allowing us to create a design for you! Now it’s time to apply your new decal!

Step 1:

Be sure that the surface you’re applying the decal to is smooth and clean. Clean the surface thoroughly with rubbing alcohol and a clean cloth.

Step 2:

With the decal transparent grid-line film facing up, set your decal on a smooth flat surface and rub entire decal down thoroughly with a squeegee like a credit card.

Step 3:

Slowly peel the transparent grid-line film away from the paper backing. As you do so the decal should remain attached to the grid-line film. If the decal doesn’t remain attached to the grid-line film as you peel it away from paper backing, lay the film back down and repeat Step 2.

Step 4:

Take the grid-line film with the decal attached and very careful position it onto the surface you are applying the decal to. Be careful not to let the film fold back onto itself. Also, be careful not to let air pockets form under the film.

Step 5:

Rub the grid-line film with decal attached down on the surface very carefully and firmly preferably with a squeegee like a credit card.

Step 6:

Finally, slowly peel the transparent grid-line film away from the surface. The decal should remain attached to the surface. If the decal tries to peel away with the grid-line film, lay the film back down onto the surface and repeat Step 5.

Step 7:

Enjoy your new personalized decal!